This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Interview
#5
Ilesha sat down with a smile though she still felt self conscious.  This wasn't her comfort zone - all the more reason she should be doing it.  

"It's all a theory, but if we can patch an engine block with the power, there is no reason why we can't make stronger, lighter and better metals with it."  Ilesha pulled out two pieces of metal from her portfolio.  "It's easier to demonstrate."

The first piece was cracked and the second was the same piece but not "The pieces both came from the same sheet of metal back home. This one is flawed and cracked. But if I use the power to strength the crack." Ilesha showed her interviewer. She hummed a little tune under breathe and the power came as easily and she worked the metal, it visibly knit back together. The seam still apparent.

"Now if we were to apply pressure to each of them in tandem and watch the buckling point." The two peices floated in the air and the air press around the tops and bottoms bending the metal easily until untouched one snapped while the other still held together. "In theory, if the whole peice was forged the same way with the one power we could make stronger and lighter metal. Light enough even for a man to carry a tank on his back and still maintain the bullet proof nature of the metal skin."
Reply


Messages In This Thread
Interview - by Ilesha - 02-15-2019, 04:54 PM
RE: Interview - by Marcus DuBois - 03-31-2019, 04:04 AM
RE: Interview - by Ilesha - 03-31-2019, 06:39 PM
RE: Interview - by Marcus DuBois - 04-01-2019, 12:20 AM
RE: Interview - by Ilesha - 04-01-2019, 02:05 PM
RE: Interview - by Marcus DuBois - 04-01-2019, 05:10 PM
RE: Interview - by Ilesha - 04-02-2019, 06:06 PM
RE: Interview - by Marcus DuBois - 04-02-2019, 10:10 PM
RE: Interview - by Ilesha - 04-04-2019, 05:04 PM
RE: Interview - by Marcus DuBois - 04-04-2019, 08:40 PM
RE: Interview - by Ilesha - 04-06-2019, 09:16 PM
RE: Interview - by Marcus DuBois - 04-06-2019, 11:33 PM
RE: Interview - by Ilesha - 04-07-2019, 10:02 PM

Forum Jump:


Users browsing this thread: 5 Guest(s)